Setting Up Static IPs for Web Control Center on Linux
How to set up a static IP for Red Hat, Fedora or CentOS
- Edit the network file /etc/sysconfig/network:
/etc/sysconfig/network
- Configure the file as follows; replacing the bolded text with your values:
NETWORKING=yes
HOSTNAME=webcc.toonboom.com
- Depending on your network card, open the configuration file. For example, if you are using eth0, then you would edit the file ifcfg-eth0.
/etc/sysconfig/network-scripts/ifcfg-eth0
- Configure the file as follows, replacing the bolded text with your values:
DEVICE=eth0
BOOTPROTO=static
IPADDR=174.142.76.72
NETMASK=255.255.240.0
GATEWAY=10.120.0.254
ONBOOT=yes
- Edit the following file:
/etc/resolv.conf
- Configure the file as follows, replacing the bolded text with your values:
search toonboom.com
nameserver 10.120.0.1
- Restart the network service:
/etc/init.d/network restart