This object controls most of the tool properties that can be found on the Tool Properties Panel. The Tool Presets view must have been loaded for these function to be available. More...

#include <toolpresetview.h>

Inheritance diagram for ToolProperties:

[legend]

Collaboration diagram for ToolProperties:

[legend]

Public Slots
General options
void	setApplyAllArts (bool b)
	set the Apply to Line Art and Colour Art checkbox state to b; in the Select Tool Options.

Brush Options
void	setDrawBehindMode (bool b)
	toggle the Draw Behind mode of the Brush tool

void	setAutoCreateColourArt (bool b)
	set the auto create colour art mode of the current tool to b if applicable.

void	setAutoFlattenMode (bool b)
	set the auto flatten mode if applicable.

void	setRespectProtectedColourMode (bool b)
	set the Respect Protected Colour mode if applicable.

void	setDrawingMagnifierMode (bool b)
	set the magnifier mode

Drawing selection
void	setMarkeeMode (bool b)
	set the select tool mode selection to Lasso or Marquee. If b is true, the mode will be set to Marquee.

void	setSnapping (bool contour, bool align, bool grid)
	set the snapping mode for the contour, align and grid mode all to the modes specified in argument.

void	setPermanentSelectionMode (bool b)
	will turn the permanent selection mode on/off depending on the parameter

void	setSelectByColourMode (bool b)
	set the select by colour mode of the Select tool .

Transform tool options
void	setPegSelectionMode (bool b)
	set the selection mode of the transform tool to peg mode if b is true

void	setTransformToolSnapping (bool align, bool grid)
	set the align and grid snapping modes of the transform tool.

void	setShowHideManipulatorControls (bool b)
	will hide the transform tool manipulator if b is true

paint options
void	setPaintAndRemoveTextureMode (bool b)
	instruct the paint tool to remove the opacity texture if b is true.

void	setUsedStoredColourGradientMode (bool b)
	instruct the paint tool to use the gradient/texture matrix stored in the tool if b is true.

void	setPaintToolShouldSelectPaintedZonesAfterPainting (bool b)
	If b is true, the paint tool will select the newly painted zone after painting. This can be useful if you want to edit a gradient on multiple zones after painting.

void	setApplyAllDrawings (bool b)
	set the apply all drawing mode to b

void	setApplyAllVisibleDrawings (bool b)
	set the apply all visible drawing mode to b

void	setAutogapClosingMode (int m)
	set the auto gap closing mode to m. Mode can be 0, 1, 2 or 3, Which corresponds to No Gap, Small, Medium and Large.

Rect and ellipse options
void	setAutoFillInside (bool b)
	set the auto fill mode of Rectangle and Ellipse tool to b

Cutter options
void	setGestureCutter (bool b)
	set the cutter's gesture mode to b

void	setMouseGestureBreakeMode (bool b)
	set the cutter's gesture break mode to b

ink options
void	setShowInkableLines (bool b)
	show the inkable lines if b is true

void	setSmartInkLineConnectionMode (bool b)
	set the smart ink line connection mode to b

void	setInkLineSelectionMode (bool b)
	instruct the ink tool to select inked lines after inking if b is true

void	setBringInkedLinesOnTop (bool b)
	instruct the ink tool to bring inked lines on top after inking if b is true

void	setInkJoinMode (QString)
	set the join mode of the inked lines to be joinType. Join type can be one of: "ROUND_JOIN", "MITER_JOIN" or "BEVEL_JOIN"

general option
void	setPencilTipMode (QString pencilTip)
	set the pencil tip shape used by the eraser, cutter, and ink tools whenever an existing pencil line gets split by the tool.

line tool options
void	setLineBuildingMode (bool b)
	set the line building mode of the Pencil tool to b.

void	setLinePushingMode (bool b)
	set the line pushing mode of the Pencil tool to b.

void	setLineAutoGapClosing (bool b)
	toggle the auto gap closing functionality for the line and pencil tools. When the auto gap functionality is on, the line or pencil tool tries to add a stroke line to cover the gap between the newly created line and any existing line.

Detailed Description

This object controls most of the tool properties that can be found on the Tool Properties Panel. The Tool Presets view must have been loaded for these function to be available.

Member Function Documentation

void ToolProperties::setApplyAllArts ( bool b )

slot

set the Apply to Line Art and Colour Art checkbox state to b; in the Select Tool Options.

void ToolProperties::setApplyAllDrawings ( bool b )

slot

set the apply all drawing mode to b

void ToolProperties::setApplyAllVisibleDrawings ( bool b )

slot

set the apply all visible drawing mode to b

void ToolProperties::setAutoCreateColourArt ( bool b )

slot

set the auto create colour art mode of the current tool to b if applicable.

void ToolProperties::setAutoFillInside ( bool b )

slot

set the auto fill mode of Rectangle and Ellipse tool to b

void ToolProperties::setAutoFlattenMode ( bool b )

slot

set the auto flatten mode if applicable.

void ToolProperties::setAutogapClosingMode ( int m )

slot

set the auto gap closing mode to m. Mode can be 0, 1, 2 or 3, Which corresponds to No Gap, Small, Medium and Large.

void ToolProperties::setBringInkedLinesOnTop ( bool b )

slot

instruct the ink tool to bring inked lines on top after inking if b is true

void ToolProperties::setDrawBehindMode ( bool b )

slot

toggle the Draw Behind mode of the Brush tool

void ToolProperties::setDrawingMagnifierMode ( bool b )

slot

set the magnifier mode

void ToolProperties::setGestureCutter ( bool b )

slot

set the cutter's gesture mode to b

void ToolProperties::setInkJoinMode ( QString )

slot

set the join mode of the inked lines to be joinType. Join type can be one of: "ROUND_JOIN", "MITER_JOIN" or "BEVEL_JOIN"

void ToolProperties::setInkLineSelectionMode ( bool b )

slot

instruct the ink tool to select inked lines after inking if b is true

void ToolProperties::setLineAutoGapClosing ( bool b )

slot

toggle the auto gap closing functionality for the line and pencil tools. When the auto gap functionality is on, the line or pencil tool tries to add a stroke line to cover the gap between the newly created line and any existing line.

void ToolProperties::setLineBuildingMode ( bool b )

slot

set the line building mode of the Pencil tool to b.

void ToolProperties::setLinePushingMode ( bool b )

slot

set the line pushing mode of the Pencil tool to b.

void ToolProperties::setMarkeeMode ( bool b )

slot

set the select tool mode selection to Lasso or Marquee. If b is true, the mode will be set to Marquee.

void ToolProperties::setMouseGestureBreakeMode ( bool b )

slot

set the cutter's gesture break mode to b

void ToolProperties::setPaintAndRemoveTextureMode ( bool b )

slot

instruct the paint tool to remove the opacity texture if b is true.

void ToolProperties::setPaintToolShouldSelectPaintedZonesAfterPainting ( bool b )

slot

If b is true, the paint tool will select the newly painted zone after painting. This can be useful if you want to edit a gradient on multiple zones after painting.

void ToolProperties::setPegSelectionMode ( bool b )

slot

set the selection mode of the transform tool to peg mode if b is true

void ToolProperties::setPencilTipMode ( QString pencilTip )

slot

set the pencil tip shape used by the eraser, cutter, and ink tools whenever an existing pencil line gets split by the tool.

Parameters

pencilTip,: can have one of the following values: "ROUND_TIP", "FLAT_TIP" or "BEVEL_TIP".

void ToolProperties::setPermanentSelectionMode ( bool b )

slot

will turn the permanent selection mode on/off depending on the parameter

void ToolProperties::setRespectProtectedColourMode ( bool b )

slot

set the Respect Protected Colour mode if applicable.

void ToolProperties::setSelectByColourMode ( bool b )

slot

set the select by colour mode of the Select tool .

void ToolProperties::setShowHideManipulatorControls ( bool b )

slot

will hide the transform tool manipulator if b is true

void ToolProperties::setShowInkableLines ( bool b )

slot

show the inkable lines if b is true

void ToolProperties::setSmartInkLineConnectionMode ( bool b )

slot

set the smart ink line connection mode to b

void ToolProperties::setSnapping	(	bool	contour,
		bool	align,
		bool	grid
	)

slot

set the snapping mode for the contour, align and grid mode all to the modes specified in argument.

void ToolProperties::setTransformToolSnapping	(	bool	align,
		bool	grid
	)

slot

set the align and grid snapping modes of the transform tool.

void ToolProperties::setUsedStoredColourGradientMode ( bool b )

slot

instruct the paint tool to use the gradient/texture matrix stored in the tool if b is true.

The documentation for this class was generated from the following file:

dox_files/toolpresetview.h

Public Slots

Detailed Description

Member Function Documentation