Ellipse Tool Properties

The Ellipse tool allows you to quickly draw an ellipse or a circle.

Shape Tool Properties View - Rectangle

NOTE To learn how to use the Ellipse tool, see About Shape Tools.

Pencil Properties

Just like other shape tools, this tool creates pencil lines. Hence, its tool properties are similar to the ones of the Pencil tool and it can be used with pencil presets.

Property Description
Preview Area

The Preview area lets you see a preview of the stroke your drawing tool will make.

Preview Stroke

Pencil Properties Dialog

The arrow button right of the preview area opens the Pencil Properties dialog.

Edit Brush To Add Texture

While the Tool Properties view only gives you access to a few of the pencil properties, a list of pencil presets and other drawing options, the Pencil Properties dialog gives you access to all the available options for your pencil's shape and texture. For more information on the Pencil Properties dialog, see the Pencil Properties Dialog section below.

Size

Defines the width of the pencil line used to draw the shape.

Shape

You can adjust the start, end, and join style of a pencil line.

Pencil Line Style

  • Start: Lets you select the style of the start tip, which is the first tip you drew. You can choose between Round or Flat style.
  • End: Lets you select the style of the end tip, which is the last tip you drew. You can choose between Round or Flat style.
  • Join: Lets you select the joint style. The joints are where the line curves abruptly. You could also define the Join style as the corner style. You can choose between Round, Mitre and Bevel style.

Pencil Presets

These options allow you to select, create and manage pencil presets.

Icon Property Description
  Presets list

Harmony provides a variety of pencil presets and thickness stencils and also lets you create and save your own. It is a good idea to create and save pencils with precise sizes and parameters when you draw for efficiency and consistency.

A thickness stencil saves the thickness information across the length of the line. When drawing with a thickness stencil, the pressure sensitivity of the tablet is discarded. A thickness stencil can be used while drawing, or applied afterwards.

You also have the possibility to apply different textures to your lines by either using the default presets or to import your own.

You can export the pencil presets that you have created and import those that others have created. This is a good way for you and project collaborators to keep a consistent look for the project.

New Brush Preset

Creates a new preset based on the current tool properties.

Delete Brush Preset

Deletes the currently selected preset.

Brush Presets Menu

Open a menu that contains the following options:

  • New Brush Preset: Creates a new preset based on the current tool properties.
  • Delete Brush: Deletes the currently selected preset.
  • Rename Brush: Allows you to rename the currently selected preset.
  • Import Brushes: Allows you to import brush presets exported from Harmony.
  • Export Brushes: Allows you to export your brush presets into an .xml file.
  • Small Thumbnail: Displays presets in a grid of small thumbnails with a preview of their tip.
  • Large Thumbnail: Displays presets in a grid of big thumbnails, with their name and a preview of their tip.
  • Stroke View: Displays presets in a list, with their name and a preview of a stroke done with each preset.

Drawing Options

These options affect the way your shape is added to your artwork.

Icon Property Description
Draw Behind

When enabled, your brush strokes will appear behind the existing artwork.

NOTE Your brush stroke will temporarily appear over your artwork as you draw it, until you release the mouse cursor or tablet pen.
Auto Fill

When enabled, the shape you draw is automatically filled with the selected colour. By default, drawing a shape only creates its outlines.

TIP

By default the pencil line and its fill will be the same colour. To select different colours for the line and its fill, do the following:

  1. In the Colour view, click the Unlock Three Colours button.
  2. Click on the Set Current Pencil Colour swatch. Then, in the colour list, select the desired colour swatch for your outline.
  3. Click on the Set Current Paint Colour swatch. Then, in the colour list, select the desired colour swatch for the fill.

Snapping

Allows you to enable or disable snapping for this tool and all other animation and drawing tools that support snapping, as well as to select which types of snapping are enabled.

If you double-click or long-click on this button, it will open a pop-up menu in which you can toggle different snapping modes. You can also click on this button to toggle it off, which will disable all snapping modes, and click on it again and toggle it on to re-enable the snapping modes which were previously enabled.

This tool supports the following snapping modes:

  • Snap to Contour: When enabled, while you're drawing, the mouse cursor will snap to the nearby contours of the artwork in your drawing.

  • Snap to Alignment Guides: While drawing, the drawing tool will snap against nearby alignment guides—see About Alignment Guides.

  • Snap and Align: When enabled, while you're drawing, the mouse cursor will automatically align to the rectangular bounding boxes of other strokes and shapes in your drawing.

  • Snap to Grid: While moving the selection, the mouse cursor will snap against the intersecting points of the grid.

    TIP To display the grid, select View > Grid > Show Grid from the top menu or press Ctrl + '.

Automatically Create Colour Art

As you draw in the Line Art layer, the Automatically Create Colour Art option instantly creates the corresponding strokes in the Colour Art layer.

Auto Flatten Mode

By default, when drawing on a vector layer, each new stroke is created as a separate drawing object, which can be edited independently from other parts of the artwork. When enabled, the Auto-Flatten option automatically merges strokes into existing artwork.

NOTE

Using the Select tool, you can use select and remove a segment of flattened pencil lines. Overlapping pencil lines drawn with the Auto-Flatten mode are essentially cut into segments by the overlap and can be treated as individual lines.

Use Stored Colour Gradient

The Use Stored Colour Gradient option can be used when painting with a gradient colour to always position the gradient in the same way it was stored, making it consistent across brush strokes. You can store a gradient by selecting a zone painted with a gradient with the Select tool, then clicking on Store Colour Gradient in the Tool Properties view.

Draw Circle

When enabled, the ellipsis tool will always draw an ellipsis of equal width and height, making it a perfect circle.

TIP You can also draw a perfect circle by holding the Shift key while drawing.

Pencil Properties Dialog

The Ellipse tool draws the same type of line as the Pencil tool. Hence, you can configure the Ellipse tool's lines using the Pencil Properties dialog, which you can open by clicking on the arrow button right of the stroke display area in the Tool Properties view.

Stroke Preview

Size and Smoothness Tab

The Size and Smoothness tab allows you to select your pencil's size, its smoothing parameters as well as the shape of its tips and corners.

Property Description
Maximum Size Defines the maximum size of the pencil line. If the tool is used with a pressure sensitive pen tablet, the width of the stroke will vary between its maximum size and minimum size depending on the amount of pressure used. If used with a mouse, the width of the stroke will always be its maximum size.
Minimum Size

Defines the minimum size of your stroke as a percentage of the maximum size. If you do not have pressure sensitivity from a pen table, the minimum size value will be ignored.

Proportional to Camera

If you check this option, the size of the pencil will be adjusted to the position of the camera on the z-axis. This means that if the camera is zoomed in on the scene, the pencil will be proportionally smaller so that it appears the same size in the rendered image. Likewise, if the camera is zoomed out, the pencil will be proportionally bigger.

Centerline Smoothing Defines the amount of smoothing Harmony should perform on the central line of the pencil stroke. A higher setting will prevent your line from being shaky and will reduce the amount of control points it has, making it easier to tweak, but is liable to reduce drawing precision and turn sharp angles into curves.
Contour Smoothing

Defines the amount of smoothing Harmony should perform on the outer contour of the pencil stroke.

A pencil line is defined by its centreline and its variations in thickness, rather than its apparent shape. When drawing a pencil line with a mouse, its thickness is uniform. Therefore, its outer contour does not have any control point, except at its extremities, and no smoothing is required for its contour.

However, when drawing a pencil line with a pressure sensitive tablet, its contour will have control points and Bezier curves to define the line's variations in thickness, and thus smoothing must be performed on its contour. An increased contour smoothing will reduce the amount of control points on the line's thickness and smoothen its curves, but may affect the precision of the variations in line thickness.

Shape

You can adjust the start, end, and join style of a pencil line.

Pencil Line Style

  • Start: Lets you select the style of the start tip, which is the first tip you drew. You can choose between Round or Flat style.
  • End: Lets you select the style of the end tip, which is the last tip you drew. You can choose between Round or Flat style.
  • Join: Lets you select the joint style. The joints are where the line curves abruptly. You could also define the Join style as the corner style. You can choose between Round, Mitre and Bevel style.

Texture Tab

In the Pencil Properties view, the Texture tab allows you to select a pencil texture from the currently selected pencil texture palette to use with the Pencil tool. You can also add, remove or rename textures, save the current pencil texture palette as the default one, or import the pencil texture palette into your scene.

The pencil texture palette used in the Texture tab of the Pencil Properties dialog is the one selected in the Colour view. You can select a pencil texture palette by selecting it from the pencil texture palette list in the Colour view—see Colour View.

Icon Property Description
Use as Default Pencil Texture Palette

This option is available from the menu button. Sets the currently selected pencil texture palette as the default pencil texture palette in your user preferences. The default pencil texture palette is added to every scene you create in Harmony. The palette is copied in your preferences, so it will be added to your new scenes in the exact state it is when you make it the default pencil texture palette.

Reload Default Texture Palette

Imports the default pencil texture palette as a new pencil texture palette into your scene's palette list, and selects it as the current pencil texture palette.

New Texture

Allows you to import an image file into a new pencil texture swatch in the current pencil texture palette. The pencil texture's effect on your pencil line will be based on the image's transparency channel, and will follow your pencil lines on its horizontal axis. This option is also available from the menu button.

Delete Texture

Deletes a pencil texture swatch from the current pencil texture palette. This option is also available from the menu button.

  Rename Texture

Renames the selected pencil texture swatch in the current pencil texture palette. This option is also available from the menu button.

  Pencil Texture Display

Displays the pencil textures in the current pencil texture palette and allows you to select one to use with the Pencil tool.

  Pencil Texture Palette Displays the name of the currently selected pencil texture palette, for reference. To select a different pencil texture palette, you must select it in the Colour view—see Colour View.