How to Create Paperless Traditional Animation
Creating a Rough Animation
The first step to create paperless animation is the rough construction, which is the skeleton of your animation. You would usually start by animating the most important part of a character's action. For example, to animate a walk cycle, you will start with the torso motion and the legs. Secondary animation such as the head, arms and clothes can be added afterward.
For a satisfactory animation, start by animating the main action with quick, rough sketches, then add the details when you're satisfied with the movement. If you start animating all the details right away, you will lose a lot of time if you have to make corrections, and your animation is likely to look rigid.
- In the top row of the Timeline view, click on Show All Thumbnails to enable Thumbnail mode.
- In the Tools toolbar, select the Brush tool or press Alt + B.
- In the Colour view, select a colour for the brush. It is a good idea to choose a light colour for your rough animation. This will make the clean up process easier as your clean dark lines will contrast with your light sketch lines.
- In the Timeline or Xsheet view, select the cell where you want your first drawing to appear.
- In the Camera or Drawing view, draw the first key drawing.
As soon as you draw your first drawing stroke, a drawing is automatically created in the cell you selected.
- Increase the Timeline view's zoom level until you see the thumbnails inside the cells by doing one of the following:
- Drag the Timeline Zoom slider to the right.
- Click on the Timeline view's tab, then press 2 repeatedly.
- Move the mouse cursor in the Timeline view, then hold Ctrl (Windows/Linux) or ⌘ (macOS) and roll the mouse wheel up.
- In the Timeline or Xsheet view, select the cell where your next key drawing will appear.
-
In the Tools toolbar, click the Onion Skin button. This will display the previous and next drawings in a light colour in the Camera or Drawing view, behind your current drawing, so that you can use them as references to draw new drawings with accuracy. This can be useful to draw breakdown poses between two key poses, or to add an in-between drawing between two other drawings.
- Ensure the onion skin displays your first key drawing, so that you can base your second key drawing on it. To do this, do one of the following:
- In the Timeline view, click and drag on the red onion skin marker to make it include the previous drawings you want to display in the onion skin, then click and drag on the green onion skin marker to make it include the next drawings you want to display in the onion skin.
Use the buttons in the toolbar above the drawing space to adjust how many previous and next drawings are included in the Onion Skin:
- To increase the amount of previous drawings to display, click on the Add Previous Drawing button in the Camera/Drawing view toolbar.
- To decrease the amount of previous drawings to display, click on the Remove Previous Drawing button in the Camera/Drawing view toolbar.
- To increase the amount of next drawings to display, click on the Add Next Drawing button in the Camera/Drawing view toolbar.
- To decrease the amount of next drawings to display, click on the Remove Next Drawing button in the Camera/Drawing view toolbar.
- Create a new empty drawing by doing one of the following:
- In the Timeline or Xsheet toolbar, click on the Create Empty Drawing button.
- Press Alt + Shift + R.
- In the Camera or Drawing view, draw your second key drawing.
-
In the Timeline or Xsheet view, select a cell between the two key drawings.
- Using the onion skin markers, ensure the onion skin covers both your first and last drawings.
- Create a new empty drawing by doing one of the following:
- In the Timeline or Xsheet toolbar, click on the Create Empty Drawing button.
- Press Alt + Shift + R.
- In the Camera or Drawing view, draw your new pose.
- In the Timeline or Xsheet view, select a new cell and repeat the previous steps for each new drawing.
Reviewing your Animation
Flipping through drawings can help see if the drawings you're working on connect well together and create the proper illusion of movement. You can quickly flip through your drawings using the Go to Previous Drawing and Go to Next Drawing keyboard shortcuts.
- In the Timeline or Xsheet view, select the drawing from which you wish to flip.
- Do one of the following:
- Press F to go to the previous drawing.
- Press G to go to the next drawing.
- Press either shortcut repeatedly at a fast pace to flip through drawings backward or forward.
When your rough animation is finished, play it back to make sure it looks as expected before proceeding to the next step.
-
In the Timeline view, click on the Solo Mode button left of each layer you want to see during playback in the Timeline view to enable Solo mode on these layers.
When one or more layer has Solo Mode enabled, only layers with Solo Mode enabled are visible, and other layers are hidden.
- In the Timeline view, move the red playhead to the first frame of your animation and click the Start button on the Timeline toolbar. Then, move the playhead to the last frame of your animation and click the Stop button.
- In the Playback toolbar, click the Loop button to enable looping during playback.
- In the Playback toolbar, click the Play button to begin playback.
Cleaning Up
When your rough animation is completed, it is time to clean it up and ink it. This step is also called tracing. It consists of tracing solid and clean lines over the rough animation to close any open zones. This is the final paperless animation step before the ink and paint step.
In traditional animation, cleaned up drawings are usually traced on a new sheet of paper with the rough underneath, made visible using the animation disk's light table. Likewise, in Harmony, you will need to add a new drawing layer on which to draw cleaned up drawings. When you're done cleaning up, you can simply disable the layer containing the rough animation so that it does not appear in the final animation. This approach also allows you to keep the roughs and the cleaned up drawings intact and to manage them independently.
In the Camera view, you will see your rough animation while working on your clean up layer. If you prefer to work in the Drawing view, you can enable the light table to display the rough animation while tracing on your clean up layer.
- In the Timeline view, rename the layer on which you created your rough animation by double-clicking on its name and entering its new name, for example: "Rough".
- In the Timeline view, add a layer by doing one of the following:
- In the Timeline view's layers toolbar, click on the Add Drawing Layer button
- Press Ctrl + R (Windows/Linux) or ⌘ + R (macOS).
The Add Drawing Layer dialog appears.
- In the Name field, type in your new layer's name, for example: "Clean-up".
- Click Add and Close to add a new layer and close the window.
A new drawing layer is added to the Timeline view.
- In the Timeline view, click the Lock icon of the layer containing your rough animation to prevent the layer from being selected in the Camera view.
- In the Timeline or Xsheet view, select the new layer’s cell corresponding to the first key drawing of your rough animation.
- In the Tools toolbar, select a drawing tool such as the Pencil tool.
- In the Colour view, select a colour for tracing your animation. Pick a dark bold colour, such as black, to make sure it contrasts well with the light colour of your rough animation.
- In the Camera or Drawing view, start tracing the first key drawing.
NOTE If overlay layers are in the way, you can disable them temporarily by clicking on their Enable/Disable button in the Timeline view, so that only your rough animation and your clean up layers are displayed.
- In the Timeline or Xsheet view, select the next cell corresponding to a rough drawing.
- In the Tools toolbar, click the Enable Onion Skin button to enable Onion Skin.
- Ensure onion skin displays your previous cleaned up drawing, by doing one of the following:
- In the Timeline view, click and drag on the red onion skin marker to make it include the previous drawings you want to display in the onion skin, then click and drag on the green onion skin marker to make it include the next drawings you want to display in the onion skin.
Use the buttons in the toolbar above the drawing space to adjust how many previous and next drawings are included in the Onion Skin:
- To increase the amount of previous drawings to display, click on the Add Previous Drawing button in the Camera/Drawing view toolbar.
- To decrease the amount of previous drawings to display, click on the Remove Previous Drawing button in the Camera/Drawing view toolbar.
- To increase the amount of next drawings to display, click on the Add Next Drawing button in the Camera/Drawing view toolbar.
- To decrease the amount of next drawings to display, click on the Remove Next Drawing button in the Camera/Drawing view toolbar.
- In the Camera view, trace your next drawing.
- Repeat the previous steps for each drawing.