Brush Tool Properties

When you select the Brush tool, its properties and options appears in the Tool Properties view.

NOTETo learn how to use the Brush tool, see About the Brush Tool.

Brush Properties

The following properties affect the brush's size, smoothing and other properties for the drawing style of your brush. Those properties can be saved into brush presets for later use.

Icon Property Description
  Preview Area

The Preview area lets you see a preview of the stroke your drawing tool will make.

Preview Stroke

  Brush Properties Dialog

The arrow button right of the preview area opens the Brush Properties dialog.

Edit Brush To Add Texture

While the Tool Properties view only gives you access to a few of the brush properties, a list of brush presets and other drawing options, the Brush Properties dialog gives you access to all the available options for your brush's tip and texture. For more information on the Pencil Properties dialog, see the Brush Properties Dialogsection below.

  Maximum Size

Defines the maximum width of brush strokes.

If the tool is used with a pressure sensitive pen tablet, the width of the stroke will vary between its maximum size and minimum size depending on the amount of pressure used. If used with a mouse, the width of the stroke will always be its maximum size.

  Smoothing

Defines the number of control points added to the centre line. The fewer the control points the smoother (but less faithful) the line.

  Flow

Lets you set the opacity for each instance of the brush tip that gets printed into your canvas. Contrary to the Opacity parameter, the flow parameter has a cumulative effect. This means that a lower flow will make your brush strokes more transparent towards its extremities and more opaque in its center. Your stroke's flow will also accumulate if you draw over it. By default, your brush's flow varies with the amount of pressure you put on your tablet pen.

NOTEThis option is only displayed in the Tool Properties view when drawing on a bitmap layer.
  Opacity

The Opacity parameter are where Lets you set the opacity of your brush strokes. Contrary to the Flow parameter, the Opacity parameter is non-cumulative. Your whole brush stroke's opacity will not exceed the Opacity parameter. By default, the Opacity parameter varies depending on the amount of pressure you put on your tablet pen.

NOTEThis option is only displayed in the Tool Properties view when drawing on a bitmap layer.

Brush Presets

These options allow you to select, create and manage pencil presets.

Icon Property Description
  Presets list

By default, Harmony has preloaded brush presets. You can also create your own brush presets by configuring your brush, then saving its properties into a new preset. It is also possible to export and import brush presets.

Select Brush Preset

New Brush Preset

Creates a new preset based on the current brush properties.

New Dynamic Brush

Creates a dynamic brush preset based on the selected drawing. A dynamic brush is a drawing that you can paint or stamp.

NOTEYou can also create a dynamic brush preset that cycles through several drawings. To do this, create the drawings on several layers, then select them all using the Select tool in the Camera view, with the Single mode option disabled—see Creating a Dynamic Brush Preset.
Delete Brush

Deletes the currently selected preset.

  Rename Brush

Deletes the currently selected preset.

  Import Brushes

Allows you to import brush presets exported from Harmony.

  Export Brushes

Allows you to export your brush presets into an .xml file.

  Small Thumbnail  Displays presets in a grid of small thumbnails with a preview of their tip.
  Large Thumbnail  Displays presets in a grid of big thumbnails, with their name and a preview of their tip.
  Stroke View

Displays presets in a list, with their name and a preview of a stroke done with each preset. This is the default setting.

Drawing Options

These options affect the way your drawing strokes are integrated into your artwork.

Icon Property Description
Draw Behind

When enabled, your brush strokes will appear behind the existing artwork. Note that they will appear over your artwork while drawing your stroke, until you release the brush.

Repaint Brush

When enabled, your brush strokes will only repaint existing artwork and will not add colour to empty areas. If you repaint semi-transparent artwork, your artwork will not become more opaque than it already is.

Automatically Create Colour Art

As you draw in the Line Art layer, the Automatically Create Colour Art option instantly creates the corresponding strokes in the Colour Art layer.

Auto-Flatten Mode

By default, when drawing, each new stroke is created as a separate drawing object, which can be edited independently from other parts of the artwork. When enabled, the Auto-Flatten option automatically merges strokes into existing artwork.

NOTEThis option is only available when drawing on a vector layer. When drawing on a bitmap layer, artwork is always flattened.
Respect Protected Colour

In the Colour view, it is possible to make some of the colours in your palettes protected from change. When enabled, the Respect Protected Colour option will prevent the brush tool from drawing over areas filled with a protected colour.

NOTEThis option is only available when drawing on a vector layer. When drawing on a bitmap layer, colour is not linked to your palettes and cannot be protected.

Use Stored Colour Gradient

The Use Stored Colour Gradient option can be used when painting with a gradient colour to always position the gradient in the same way it was stored, making it consistent across brush strokes. You can store a gradient by selecting a zone painted with a gradient with the Select tool, then clicking on Store Colour Gradient in the Tool Properties view.

Brush Properties Dialog

Brushes have an extensive set of options and properties that are not displayed in the Tool Properties view, but rather, in a dialog you can access from it. To open the Brush Properties dialog, click on the arrow button right of the stroke display area.

Edit Brush To Add Texture

The Brush Properties dialog has five different tabs, minus the Smoothing tab if you are working on a bitmap layers. Below is detailed information about the options available in each tab:

Tip Tab

The Tip tab allows you to configure the shape, size, hardness and spacing of your brush tip.

Property Description
Brush Type

Allows you to select between one of the following brush types:

  • Solid Vector Brush: Creates vector shapes filled with a solid colour. Makes artwork lightweight, scalable and easy to tweak. Since this kind of brush can only create solid colour shapes, solid vector brushes have a limited set of options including size, roundness, angle, centerline smoothing and contour smoothing.
  • Textured Vector Brush: Creates vector shapes filled with a texture. This gives you access to bitmap brush tips, paper textures, transparency and several other options.
NOTEThis option is not available when working on a bitmap layer. With bitmap layers, brushes are always textured, and textured brush options are always available.
Brush Tip Library

This is where you select the shape of the brush tip. By default it is round. Note that some tips are designed to have semitransparent areas, even when the maximum brush opacity is set to 100%.

To create a custom brush tip, you must prepare the file ahead of time, either in Harmony or in a third-party software, such as Adobe Photoshop. Colour is not supported and transparency is not supported in the traditional sense. Black appears as 100% opaque, white appears as 100% transparent and all the shades of grey in between appear as varying degrees of semitransparency. A range of file formats are supported—.jpeg, .png, .tif, .psd, .tga to name a few. Alpha channels are disregarded on import. It is recommended that your file be between 100 x 100 pixels and 400 x 400 pixels.

You can also import brush tips that you exported from Harmony, so you can share them with colleagues.

Minimum and Maximum Size

The minimum and maximum sizes of your drawing tool produce the thick and thin effect on your stroke. This works with the pressure sensitivity of a pen tablet.

  • Maximum Size: Defines the maximum width of the stroke.
  • Minimum Size: Defines the minimum width of the stroke in relation to and as a percentage of the maximum size.
NOTESetting the Minimum Size value to 100% eliminates the possibility of creating width variation on your stroke. In other words, you would be forcing a uniform line width using the Maximum Size value.

Roundness and Angle

The Roundness and Angle parameters allow you to change the shape and orientation of the tip.

  • Roundness: Squashes the height of the tip from its centre point. 100% roundness = the native height of the tip. A smaller percentage will make the brush tip look flatter and more narrow. The squashing is NOT relative to the angle value—if the tip is rotated, the squashing function still uses the brush tip's original orientation.
  • Angle: Rotates the brush tip counter-clockwise. 0° = the tip's native orientation.

Hardness

The Hardness and Spacing parameters allow you to change the softness and spacing of the marks made by the brush tip. You can preview the hardness and spacing at the top of the Brush Properties window, stroke preview area.

The hardness value corresponds to the softness of the brush tip's edges. The lower the value, the softer the tip edge. The higher the value, the sharper the tip edge. Be aware that some brush tips are not 100% opaque, so they will always appear somewhat soft, even at 100% hardness.

Spacing

Defines the amount of space between each stamp of the brush. A value of 100% sets the stamp marks edge to edge, if there is no white space around the shape. The larger the value, the greater the space between marks. A really large value can make the brush stroke appear as a string of individual marks. Conversely, a small spacing value will give the appearance of a fluid brush stroke.

Spacing is only evident when making a continuous stroke.

Randomness

The Randomness parameters let you create a varied brush stroke. Refining these options can give your stroke a lovely, non-mechanical look.

Random Size

You can create variation between the thick and thin of your brush stroke just by setting the Maximum and Minimum Size values. If you add randomness to the mix, pressure sensitivity from your drawing tablet will still be applied. Light pressure will create random values around the minimum, while heavy pressure will create random values closer to the maximum. The larger the percentage, the larger the range of random variation.

NOTESetting the Minimum Size to 100% eliminates the possibility of creating width variation on your stroke, whether you are applying randomness or not. Therefore, you would be forcing a uniform line width using the Maximum Size value.
Random Angle

Sets the range for random rotation around the set Angle value. For example, if the Angle is set to 45° and the Random Angle set to 10°, the software will choose values between 40°–50° (plus or minus 5 degrees, equaling a total of 10 degrees).

Random Spacing

Sets the range for random spacing around the set Spacing value. For example, if the Spacing is set to 50% and the Random Spacing is set to 10%, then Harmony will choose values between 45%–55% (plus or minus 5 percent, equaling a total of 10 percent).

Smoothing Tab

The Smoothing tab contains options to configure how Harmony should automatically smooth your brush strokes as you paint.

NOTEThe Smoothing tab is only available when working on a vector layer, as bitmap layers do not support smoothing.
Property Description
Centerline Smoothing Defines the amount of smoothing Harmony should perform on your brush stroke's direction, curves and corners. A higher setting will prevent your line from being shaky, but is liable to reduce drawing precision and turn sharp angles into curves.
Contour Smoothing
  • Defines the amount of smoothing Harmony should perform on outer contour of the brush stroke. A higher setting will round sharp corners and reduce the amount of control points for the resulting vector shape.
  • Transparency Tab

    The Transparency tab allows you to decide if your brush has antialiasing as well as to set its flow and opacity settings.

    NOTEThe Transparency tab's options are only available on vector layers if the Brush Type option of the Tip tab is set to Textured Vector Brush. On bitmap layers, those options are always available.
    Property Description
    Antialiasing

    Enabled by default. This option causes the contours of the brush strokes to blend with the surrounding colours, to create an illusion of smoothness otherwise not possible due to the picture resolution.

    If antialiasing is disabled, the brush's texture will only render fully transparent or fully opaque pixels. Disabling this option can be useful if you need your outlines to be very crisp, if you want to make pixel art or if you need your brush strokes to render in solid colors with no variation, which makes them easier to repaint or process in third party software.

    NOTEWhen disabled, all other options in the Transparency tab are disabled.
    Maximum and Minimum Flow

    The Maximum and Minimum Flow parameters let you set the range for the rate at which paint flows from your brush. The analogy works better with a pen. The greater the flow, the more ink comes out, hence the more consistent the colour and texture of the line. If the flow is light, then the colour and texture of the line may look spotty. This feature works with the pressure sensitivity of a pen tablet.

    • Maximum Flow: Sets the maximum rate at which colour and texture are applied as you create a fluid stroke.
    • Minimum Flow: Sets the minimum rate at which colour and texture are applied as you create a fluid stroke. It is defined as a percentage of the Maximum Flow value. If the Minimum Flow value is set to 100%, then tablet pressure sensitivity will no longer be applicable. The flow will be set to the constant rate of the Maximum Flow value.

    Maximum Opacity and Minimum Opacity

    The Maximum and Minimum Opacity parameters are where you set the opacity range for a brush mark. This works with the pressure sensitivity of a pen tablet.

    • Maximum Opacity: Sets the transparency limit of the brush mark when the pressure is heavy.
    • Minimum Opacity: Sets the transparency limit of the brush mark when the pressure is very light. It is defined as a percentage of the Maximum Opacity value. If the Minimum Opacity value is set to 100%, then tablet pressure sensitivity will no longer be applicable. The opacity will be set to the constant rate of the Maximum Opacity value.

    Randomness

    Th Randomness parameter lets you set the range for the randomness of the flow and opacity. This works with the pressure sensitivity of a pen tablet.

    Randomness Flow

    You can create variation in the flow of your brush stroke just by setting the Maximum and Minimum Flow values. If you add randomness to the mix, pressure sensitivity from your drawing tablet will still be applied. Light pressure will create random values around the minimum, while heavy pressure will create random values closer to the maximum. The larger the percentage, the larger the range of random variation.

    NOTESetting the Minimum Flow value to 100% eliminates the possibility of creating flow variation on your stroke, whether you are applying randomness or not. That is, you would be forcing a uniform flow using the Maximum Flow value.
    Random Opacity

    You can create variation in the opacity of your brush stroke just by setting the Maximum and Minimum Opacity values. If you add randomness to the mix, pressure sensitivity from your drawing tablet will still be applied. Light pressure will create random values around the minimum, while heavy pressure will create random values closer to the maximum. The larger the percentage, the larger the range of random variation.

    NOTESetting the Minimum Opacity value to 100% eliminates the possibility of creating opacity variation on your stroke, whether you are applying randomness or not. That is, you would be forcing a uniform opacity using the Maximum Opacity value.

    Dual Tip Tab

    The Dual Tip tab lets you set the parameters for creating a dual tip brush. The primary bitmap brush tip and the dual tip always work together. You can set the parameters for the primary tip in the Tip tab and those for the dual tip in the Dual Tip tab. The Blend mode you select determines how the tips are combined.

    By default, the Blend Mode is set to Multiply and the Random Angle to 360°.

    NOTETo use a Dual Tip, you must enable option by checking the checkbox inside the Dual Tip tab. Additionally, if you are working on a vector layer, the Brush Type option of the Tip tab must be set to Textured Vector Brush.
    Property Description
    Enable/Disable The checkbox inside the tab allows you to decide whether or not your brush uses a dual tip. If this checkbox is unchecked, the options in the Dual Tip tab will be disabled.
    Blend Mode The Blend modes let you decide how the primary tip and the dual tip are combined.

    Multiply

    This is the default blend mode. When the two brush tips are combined in this mode, they essentially cut each other out in overlapping areas, where one or both tips have an area of 100% transparency. The less opaque the brush tips are, the lighter their combination.

    Colour Dodge

    In this mode, the primary tip cuts out the shape of the dual tip. Where the tip shapes overlap, within the boundaries of the primary shape, the colour and opacity appear darker.

    Combine

    This mode treats the two tips as two different and separate brushes that have the same colour and follow the same path.

    Paper Texture Tab

    The Paper Texture tab lets you configure a paper-like texture for your brush. You can also add textures by importing image files, or import paper textures that were previously exported from Harmony.

    NOTETo use a Paper Texture, you must enable option by checking the checkbox inside the Paper Texture tab. Additionally, if you are working on a vector layer, the Brush Type option of the Tip tab must be set to Textured Vector Brush.
    Property Description
    Enable/Disable The checkbox inside the tab allows you to decide whether or not your brush uses a paper texture. If this checkbox is unchecked, the options in the Paper Texture tab will be disabled.
    Texture Scale Increase or decreases the size of the paper texture.
    Additive

    This option layers the texture on top of itself as you scribble overlapping lines in one continuous stroke. If this option is turned off, areas of overlapping lines from a single, continuous stroke will appear the same, in terms of darkness and texture, as non-overlapping areas.

    Aligned

    This option defines the way separate, overlapping strokes behave. If this option is enabled, the paper texture's position does not change with each sweep of the brush. If this option is disabled, each sweep of the brush produces a different texture position. The texture orientation always stays the same.