This chapter explains how to configure your scanner to work with Harmony on Mac OS X.
Before you can configure your scanner, your scanner should already be configured, switched on, and connected to your system.
After your scanner is configured, you must modify the hardware so Harmony can align images scanned using autofeed.
Modifying the Scan.conf File
After you have installed your scanner hardware, you must configure your scanner to communicate with Harmony. To do this, you must find the name of your scanner using the Find Scanner Utility. Then, you must add this name to the Scan.conf file.
- Open a terminal and type the following:
The findscanner utility reports the following information:
The device found must be copied into the Scan.conf file, including the angle brackets.
- Modify the Scan.conf file with the Harmony Configuration Editor. Open a Finder and select
Applications > Harmony 12.2.1 [edition] > Tools > Configuration Editor.
- In the Harmony Configuration Editor, select the Scan.conf tab.
The following is an example of entries in a Scan.conf file for a Fujitsu scanner on Mac OS X.
name: Fujitsu BW
descr: The scanner to use for black & white and greyscale scans.
The following options must be included in the Scan.conf file:
where [hostName] is the name of the machine that the scanner is attached to.
where [scannerName] is the name you want the scanner to be listed as in the scanner drop-list in the Harmony.
|•||device: <device name>|
where <device name> is the name the findscanner utility reports. You must include the angle brackets.
where [modelName] is the model name of your scanner (the name is case sensitive and there can be no spaces separating the name and the number). Following is a list of supported scanners.