A cloned layer is linked to the original element directory. If a drawing is modified in the original or cloned layer, both will be updated. However, clone layers can have different timings.
For example, if you make a walk-cycle for a soldier and want to use it for a whole army, you may want to have fifty layers with fifty different drawing exposures to produce a slight difference in the timing. You don’t necessarily want the same drawing fifty times. If you copy your layers and their drawings fifty times over, it will create a very heavy scene. It is better to clone the fifty layers from the same initial layer to have them all linked to the same walk cycle drawings, producing fifty layers but one drawing directory. This will also allow you to correct the drawings in one layer and have all of the other ones updated simultaneously.
To clone a layer:
|1.||In the Timeline view, select a layer to clone.|
|‣||In the Network view, select the module you want to clone.|
|2.||In the Timeline View menu, select Layers > Clone Selected Layers.|
|‣||In the Network View menu, select Modules > Clone Selected Modules.|
Note that the module appears in the Timeline view if it is not connected to the Composite module or if the Display mode is not set on Display All.
|•||Setting Up the Network|