The Rotation Velocity module lets you define the initial rotational velocity of the particles. The values that you set up for this module refer to each individual particle's drawing axes. This means that if you choose to rotate around the X axis, it will rotate around each particle's local X axis as defined by its drawing plane.
The rotational velocity should be set before you emit the particles, such as to the right, so the velocity is taken into account when the particles are created.
Rotation Velocity Properties
|Name||Lets you to rename the module.|
Trigger: An on/off switch using binary code. 1 = on, 0 = off.
Axis Type: Select the type of axis you would like to use.
Axis0 X: Define the X component of Axis0. If you set the X to 1, and the Y and Z to 0, then the particle will rotate around its X axis as defined by its drawing plane. If you set X to 1 and also Y to 1, then it will rotate around an axis that is 45 degrees between X and Y.
Axis0 Y: Define the Y component of Axis0.
Axis0 Z: Define the Z component of Axis0.
Axis1 X: Define the X component of Axis1. This applies only when you have selected an Interpolated axis.
Axis1 Y: Define the Y component of Axis1.
Axis1 Z: Define the Z component of Axis1.
Minimum: Enter the minimum initial rotation that a particle can have, in degrees per frame.
Maximum: Enter the maximum initial rotation that a particle can have, in degrees per frame.