Increasing and Decreasing Exposure
Once a value is entered in the
Increasing the exposure adds one more exposure to a selected cell; repeating this action adds an extra cell each time. This is an efficient way of extending a drawing exposure and is always set in Insert mode. Increasing an exposure pushes the existing exposure ahead.
1. | In the |
2. | Do one of the following: |
‣ | In the top menu, select Animation > Cell > Increase Exposure. |
‣ | Right-click on the selected cell and select Exposure > Increase Exposure. |
‣ | Press +. |
‣ | In the Xsheet |
1. | In the |
2. | Do one of the following: |
‣ | In the top menu, select Animation > Cell > Decrease Exposure. |
‣ | Right-click on the selected cell and select Exposure > Decrease Exposure. |
‣ | In the Xsheet |
‣ | Press -. |
1. | In the Xsheet view, select the cell to modify. |
2. | Do one of the following: |
‣ | In the Xsheet's bottom right-corner, enter the number of cells over which the drawing will be exposed. |
‣ | In the Xsheet’s bottom-right corner, increase or decrease the drawing’s exposure by clicking the up or down arrows. |
‣ | Press + to increase exposure. |
‣ | Press - to decrease exposure. |
1. | In the |
2. | Do one of the following: |
‣ | From the top menu, select Animation > Cell > Clear Exposure and Pull. |
‣ | Right-click on the selected cell and select Exposure > Clear Exposure and Pull. |
‣ | In the Xsheet |
3. | The exposure is reduced by the selected number of cells. |